August 2011 November 2011
•Project: VW 361 Project – China Chengdu.
•Position: Robot Programmer and welding Bosch
July 2011 until August 2011
•Project: VW T5 and Caddy – Poland Poznan.
•Position: Robot Programmer and welding Fase and Harms & Wende weld controlers
•Responsibilities:.
• Kuka Robot Programming and Fase/ harms & Wende programming.
Nov 2010 until May 2011
•Project: VW 361 Project – China Chengdu.
•Position: Robot Programmer and welding Bosch
•Responsibilities:.
• Robot Programmer and welding Bosch
May 2010 until November 2010
Project: VW Polo 250 Project – Uitenhage SA.
•Robot Programmer and welding Bosch
• Spot weld moves and updating spot Data
January 2009 to January 2010
Volkswagen of SA Pty Ltd, Uitenhage, South Africa
Installation of complete welding project, Networking all timers to line PC’s.
Initial programming and KRS setup of the Bosch 6000 weld timers for the VW250 project.
Weld optimization until 100% weld quality was achieved and TLD approved.
Splatter/expulsion optimization.
Supplied six robot programmers for this project.
January 2008 to November 2008
Comau SA Body Systems, 77 Baird Street, Uitenhage, South Africa
Initial programming and KRS setup of the Bosch 6000 weld timers for the W204 Daimler Chrysler project.
The training of robot programmers for the project. MC Welding was also involved in a large part of the programming of the line.
January 2008 to December 2008
Daimler Chrysler SA PTY (LTD)
P O Box 671
East London
5200
W204 Project
Weld engineering work on the Bosch 6000 adaptive welding.
Project was a great success and due to the quality of workmanship Daimler Chrysler was awarded the JD Power Gold Quality Award 2009 for outstanding quality.
March 2008 – November 2008
P.K. Welding and Robotics
136 Peterson Road
Port Elizabeth
Project – Mitsubishi Triton
Manual welding setup on the Bosch 5000 KSR . Installation of all reset panels for weld controllers.
Production support.
July 2008 – November 2008
Colt Mitshibishi – Daimler Chrysler
P O Box 671
East London
Project – Triton
EBF installation on three weld pcs. Bosch 5000 training for the plant and splatter optimization.